DISC FINISHING UNITS– CF STANDARD SERIES

WALNUT SHELL H 1 GRANULATE IMPREGNATED WITH POLISHING PASTE
This granulate is impregnated with a polishing paste so that no further polishing paste need be added for the first 3 – 4 batches. Typical applications: mirror-finish polishing of precious metals, jewelry, titanium and steel alloys

Type Grain size Properties / surface
H 1/30 4.0 – 6.0 mm very smooth surface
H 1/50 2.4 – 4.0 mm very smooth surface
H 1/100 1.7 – 2.4 mm very smooth surface
H 1/200 1.3 – 1.7 mm very smooth surface
H 1/300 0.8 – 1.3 mm very smooth surface
H 1/400 0.4 – 0.8 mm very smooth surface
H 1/500 0.2 – 0.4 mm very smooth surface

WALNUT SHELL GRANULATE H 2 IMPREGNATED WITH GRINDING PASTE
This granulate is impregnated with a grinding paste so that no further grindig paste needs to added for the first three or four batches.

Type grain size Properties / surface
H 2/30 4.0 – 6.0 mm smooth surface
H 2/50 2.4 – 4.0 mm smooth surface
H 2/100 1.7 – 2.4 mm smooth surface
H 2/200 1.3 – 1.7 mm smooth surface
H 2/300 0.8 – 1.3 mm smooth surface

WALNUT SHELL GRANULATE H 3 IMPREGNATED WITH PP 01 POLISHING PASTE
This granulate is impregnated with a polishing paste so that no further polishing paste need be added for the first 3 – 4 batches. Typical applications: tungsten carbide, ceramics

Type Grain size Properties / surface
H 3/400 0.4 – 0.8 mm Smoothing
edge rounding to 10 μm
Polishing tools

WALNUT SHELL GRANULATE H 4 IMPREGNATED WITH PP 02 POLISHING PASTE
This granulate is impregnated with a polishing pastr so that no further polishing paste need be added for the first 3 – 4 batches. Typical applicatioins: tungsten carbide, ceramics

Type Grain size Properties / surface
H 4/400 0.4 – 0.8 mm As H 3/400 but
better shine
ideal polishing results for tungsten carbide
suitable for removing droplets
H 4/500 0.2 – 0.4 mm As H 3/400 but
better shine
ideal polishing results for tungsten carbide
suitable for removing droplets

WALNUT SHELL GRANULATE H 0 UNIMPREGNATED
Granulates can also be supplied unimpregnated (walnut shell granulate H 0). This granulate must be impregnated with a grinding or polishing powder before it is first used. Dosage: 5 -10 teaspoons / 5kg walnut shell granulate.

Type Grain size Properties / surface
H 0/30 4.0 – 6.0 mm
H 0/50 2.4 – 4.0 mm
H 0/100 1.7 – 2.4 mm
H 0/200 1.3 – 1.7 mm
H 0/300 0.8 – 1.3 mm
H 0/400 0.4 – 0.8 mm
H 0/500 0.2 – 0.4 mm