Eco Maxi Series

ECO MAXI “BASIC” SERIES
This is the basic drive unit without process containers. The ECO-Maxi basic is designed to get the best out of all three processes. Depending on the container chosen, a single drive unit can be used for magnetic polishing, wet grinding or dry polishing. This is done by simply attaching the appropriate interchangeable container.

STANDARD EQUIPMENT

• Speed control via frequency inverter
• Bayonet fitting for container
• LCD indicating speed and processing time
• Automatic container detection

ECO-MAXI “WET” SERIES
Perfect results are obtained after just 3-4 hours. The use of a special “soft” abrasive medium ensures that the surface of the workpiece does not become hardened – reliably preventing the surface from becoming pitted. The results are the complete removal of any traces of sanding/ grinding and casting and clean, bright workpiece surfaces.

BASIC EQUIPMENT

• Speed control via frequency inverter
• Bayonet fitting for easy container removal
• LCD indicating speed and processing time
• 6 l process container for wet finishing including dosing pump and waster water tank

ECO-MAXI “DRY” SERIES
Very fine polishing granulates made from walnut shell ensure a perfect surface finish. Material removal is in the micro range. No damage to diamonds, zirconia or pearls in their settings. Processing time for initial polishing approx. 2-3 hours, for final polishing approx. 30 minutes, giving extremely smooth surfaces and a brilliant shine comparable to that achieved by manual polishing.

STANDARD EQUIPMENT

• Speed control via frequency inverter
• Bayonet fitting for container
• LCD indicating speed and processing time
• 6 l process container for dry finishing

ECO MAXI “MAGNETIC” SERIES
This machine type is designed exclusively for magnetic polishing applications. This is the preparatory stage for wet finishing and replaces the traditional electrolytic polishing bath. Oxide discolorations and investment material residues are completely removed after approx. 15 – 30 minutes and even inaccessible areas of intricate workpieces are polished to a high shine.

STANDARD EQUIPMENT

• Speed control via frequency inverter
• LCD indicating speed and process time
• up to 1,900 rpm
• Automatic change in the direction of rotation
• 6 l process container
• 200 g rounded stainless steel pins M 4/7
• 1 l compound SC 4

INTERCHANGEABLE CONTAINERS

Magnetic polishing
6 l interchangeable container with magnetic polishing medium

RECOMMENDED PROCESS QUANTITIES*:

• Granulate: 200 g steel pins
• Workpieces: approx. 300 g

Dry polishing
6 l interchangeable container for dry polishing

RECOMMENDED PROCESS QUANTITIES*:

• Granulate: 2.2 kg walnut shell granulate
• Workpieces: approx. 300 g

Wet grinding
6 l interchangeable container for wet finishing (5.5 kg)
RECOMMENDED PROCESS QUANTITIES*:

• Granulate:
  3 kg plastic abrasive
  or 12 kg stainless steel polishing agent
  or 4 kg porcelain polishing agent
• Workpieces: approx. 300 g

PROCESSING MEDIA SETS

Dry finishing
COMPRISING:

• 5 kg H1/100 walnut shell granulate for pre-polishing
• 5 kg H1/500 walnut shell granulate for fine polishing
• 1 kg polishing paste P 6
• 1 scoop
• 1 ladle

Wet finishing
COMPRISING:

• 2 kg PA 10 plastic abrasive, red (coarse grinding)
• 2 kg KA 10 plastic abrasive, red (coarse grinding)
• 2 kg PX 10 plastic abrasive, white (fine grinding)
• 2 kg KX 10 plastic abrasive, white (fine grinding)
• 10 l compound SC 13

MISCELLANEOUS

Manual screen
A variety of screen sizes are available

Lid
for water storage jar
(only availab for the ECO-Maxi-I “wet”)

Trolley
for storage containers
(only available for the ECO-Maxi-I “wet”)

Ring holder
for heavy rings (>6 g). Prevents the rings from colliding with one another.

Emergency cut-out
when water supply is depleted
(only available for ECO-Maxi-I “wet”)